[Xerte] Annotated Diagram page wizard in Xerte 2 desktop
Mary Ann Ahearn
maryann at moberg.com
Thu May 27 19:57:20 BST 2010
Figured it out!
You need to go through the model file and substitute:
pageIcon.templateData.learningObject[0].annotatedDiagram[0]
for every instance of
pageIcon.templateData.annotatedDiagram[0]
And it works like a charm.
Thanks again for the improvement to the template.
ma
At 12:00 PM 5/27/2010 -0400, you wrote:
>Thanks so much for the new models, Julian.
>
>I must be doing something drastically wrong in trying to use them.
>
>I have substituted each model file you sent,
>slightly renamed to match the old rlm file, in
>the xcp file that lives in my Xerte Program
>Files wizards Interactivity folder.
>
>Next, I opened Xerte and added the
>AnnotatedDiagram Page Template with the proper file structure like I always do.
>
>The wizard opens and I build my AnnotatedDiagram page with no problem.
>
>When I go to run it, all I get is a blank panel!
>
>This also happened with the first set of updated
>model files you sent several day ago.
>
>If I close Xerte, put the old rlm file back, and
>re-build an AnnotatedDiagram page all is fine.
>
>Does this make any sense? I'm baffled. Haven't
>been able to test the new models because I'm getting nothing.
>
>Duh
>
>Thanks
>ma
>
>
>At 09:33 AM 5/27/2010 +0100, you wrote:
>>Thanks – that’s well spotted, and thanks for
>>the info on how to fix it, new models attached,
>>
>>From: xerte-bounces at lists.nottingham.ac.uk [
>>mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Kemp Johnathan
>>Sent: 26 May 2010 15:56
>>To: Xerte discussion list
>>Subject: Re: [Xerte] Annotated Diagram page wizard in Xerte 2 desktop
>>
>>Hello Julian,
>>
>>Thanks for the updated models, I took a quick
>>look at them with a view to updating the page wizards.
>>
>>Annotated diagram
>>The new model fails to show the descriptive
>>text for a hotspot group unless an ordinary hotspot has first been
>>actioned so that the yellow text area has been displayed.
>>
>>This appears to be because in the original
>>model the text icon named "information" was not a child of the
>>clickHandler, but was outside of the protoLabel
>>and protoGroupLabel icon structure, so that it could be referenced
>>both by a single annotation or a group annotation.
>>
>>By bringing it inside the protoLabel structure
>>it is not displayed until a standard hotspot
>>has been used. In an example where all the
>>hotspots are contained in hotspot groups no
>>descriptive text will ever be displayed.
>>
>>Drag drop label
>>Colour highlighting of hotspots is no longer
>>registering - hotspots are now boxed in black
>>rather than yellow, so do not show up well, and
>>when a label is dragged onto the wrong location
>>no error message is displayed (Try again use to be displayed)
>>
>>Kind regards
>>
>>Johnathan
>>
>>On 24 May 2010 10:43, Julian Tenney
>><<mailto:Julian.Tenney at nottingham.ac.uk> Julian.Tenney at nottingham.ac.uk> wrote:
>>Replace your models with the attached: let me know if there are any problems,
>>
>>J
>>
>>From:
>><mailto:xerte-bounces at lists.nottingham.ac.uk>xerte-bounces at lists.nottingham.ac.uk
>>[ mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Mary Ann Ahearn
>>Sent: 21 May 2010 23:07
>>To: Xerte discussion list
>>Subject: Re: [Xerte] Annotated Diagram page wizard in Xerte 2 desktop
>>
>>Just tested both Annotated Diagram and Drag &
>>Drop in the original Page Template project wide
>>template, and the problem is there as well.
>>
>>Interesting note is that the Hot Spot page
>>template and the Hot Spot Page Wizard both work
>>correctly - scrolling the too long annotation if necessary.
>>
>>Hope this helps.
>>
>>Thanks
>>ma
>>
>>At 08:47 PM 5/21/2010 +0100, you wrote:
>>Mary,
>>
>>Have you tried creating a Xerte project based
>>on the Page Templates project wide template and
>>then duplicating the pages that are causing you
>>the problem, in the corresponding page types.
>>
>>It would help to know if the problems exist in
>>the original Page Templates code or are limited
>>to the Page Wizard based version of the page.
>>
>>Kind regards
>>
>>Johnathan
>>
>>On 21 May 2010 16:21, Mary Ann Ahearn
>><<mailto:maryann at moberg.com>maryann at moberg.com> wrote:
>>Thank so much.
>>In the meantime, I've also discovered it's the
>>same for the Drag & Drop page wizard.
>>BTW, Congratulations on the award!!!! You guys are phenomenal.
>>At 03:39 PM 5/21/2010 +0100, you wrote:
>>Content-class: urn:content-classes:message
>>Content-Type: multipart/related;
>> boundary="----_=_NextPart_001_01CAF8F3.71D6CA9B";
>> type="text/html"
>>I need to fix that - bear with me,
>>
>>----------
>>From:
>><mailto:xerte-bounces at lists.nottingham.ac.uk>xerte-bounces at lists.nottingham.ac.uk
>>on behalf of Mary Ann Ahearn
>>Sent: Fri 21/05/2010 02:32
>>To: <mailto:xerte at lists.nottingham.ac.uk>xerte at lists.nottingham.ac.uk
>>Subject: [Xerte] Annotated Diagram page wizard in Xerte 2 desktop
>>I've been using the Annotated Diagram page
>>wizard and have come upon a problem I can't
>>figure out how to solve and wonder if anyone can help.
>>The annotation is quite long and extends past
>>the bottom of the text box and beyond the
>>bottom of the window, even though scrolling is set to auto for this text icon.
>>I've tried a number of workarounds to no
>>avail. Could it have something to do with the
>>fact that no text is actually assigned on the
>>text icon itself but only in the code? Could
>>that cause the auto scrolling option to be
>>confused about how much screen height is needed and whether or not to scroll?
>>Thanks hugely!
>>ma
>>
>>
>>_______________________________________________
>>Xerte mailing list
>><mailto:Xerte at lists.nottingham.ac.uk>Xerte at lists.nottingham.ac.uk
>>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>>
>>_______________________________________________
>>Xerte mailing list
>><mailto:Xerte at lists.nottingham.ac.uk>Xerte at lists.nottingham.ac.uk
>>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>>
>>_______________________________________________
>>Xerte mailing list
>><mailto:Xerte at lists.nottingham.ac.uk>Xerte at lists.nottingham.ac.uk
>>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>>
>>_______________________________________________
>>Xerte mailing list
>><mailto:Xerte at lists.nottingham.ac.uk>Xerte at lists.nottingham.ac.uk
>>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>>
>>
>>
>>_______________________________________________
>>Xerte mailing list
>>Xerte at lists.nottingham.ac.uk
>>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>_______________________________________________
>Xerte mailing list
>Xerte at lists.nottingham.ac.uk
>http://lists.nottingham.ac.uk/mailman/listinfo/xerte
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nottingham.ac.uk/pipermail/xerte/attachments/20100527/e379893a/attachment.html
More information about the Xerte
mailing list