[Xerte] Re: Upgrading xerte online toolkits to 1.8

[Fay Cross]

Ignore me, didn't see most recent emails...
________________________________________
From: xerte-bounces at lists.nottingham.ac.uk [xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Fay Cross [Fay.Cross at nottingham.ac.uk]
Sent: 12 September 2012 13:43
To: Xerte discussion list
Subject: [Xerte] Re: Upgrading xerte online toolkits to 1.8

>From looking at the site Rose showed me this morning it looks like they are still running 1.7 after replacing the files.  Assuming there's nothing else they would need to do to get 1.8 working I think they may be replacing 1.7 with 1.7 if you see what I mean. Does the zip on our website definitely contain the most recent files? Where's the best place for Remy to get 1.8 from? svn or zip?

________________________________________
From: xerte-bounces at lists.nottingham.ac.uk [xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Pat Lockley [patrick.lockley at googlemail.com]
Sent: 12 September 2012 13:24
To: Xerte discussion list
Subject: [Xerte] Re: Upgrading xerte online toolkits to 1.8

The database hasn't changed.

What problem are you getting exactly?

On Wed, Sep 12, 2012 at 1:17 PM, Remy Olasoji <r.olasoji at uel.ac.uk> wrote:
> Hi Fay
>
> Just had a thought about this.  The instruction didn't say anything about
> starting with a new database so I am still using the old database.  Could
> that be the problem maybe?  Should I use a new database?  (Since I had to
> remove the setup folder, I assumed the old database is needed - is it?)
>
> Regards,
> Remy
>
> ________________________________
>
> From: Remy Olasoji
> Sent: Wed 12/09/2012 13:06
> To: Xerte discussion list
> Cc: Rose Heaney
> Subject: RE: [Xerte] Re: Upgrading xerte online toolkits to 1.8
>
>
> Hi Fay,
>
> Yes I downloaded and unzipped the version here:
> http://www.nottingham.ac.uk/xerte/community.htm.  Unzipped it and replaced
> the site folder with the files, after removing the setup folder.  I thought
> maybe the copy on that web page could be the problem but I'll go through the
> process again just in case now.
>
> Thanks a lot for your help.
>
> Regards,
> Remy
>
> ________________________________
>
> From: xerte-bounces at lists.nottingham.ac.uk on behalf of Fay Cross
> Sent: Wed 12/09/2012 12:16
> To: Xerte discussion list
> Subject: [Xerte] Re: Upgrading xerte online toolkits to 1.8
>
>
>
> Hi Remy
>
> I've just spoken to a colleague of yours at ALT-C who said you have had some
> problems upgrading (sorry I can't recall her name - Rose?). She showed me
> your installation where she thought you had installed 1.8 but it was
> definitely missing things and still looked like 1.7 to me. What are the
> problems you are having? She seemed to be saying that you had installed it
> but nothing seems to have changed, or are the problems before you complete
> the installation?
>
> Someone on the list (probably not me!) should be able to give some advice if
> you let us know what's failing.
>
> Fay
>
> ________________________________________
> From: xerte-bounces at lists.nottingham.ac.uk
> [xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell
> [ronm at mitchellmedia.co.uk]
> Sent: 10 September 2012 16:14
> To: 'Xerte discussion list'
> Subject: [Xerte] Re: Upgrading xerte online toolkits to 1.8
>
> I was planning to write up some instructions and.or screencast but haven't
> found time yet. Here's a quick summary:
>
> 1. backup existing database and directory just in case
> 2. drop 1.8 code over top of existing code (for an upgrade you don't need the
> setup folder)
> 3. visit the install to test the basics are working ok via guest access e.g.
> create and test an LO
> 4. If you are using LDAP for authentication visit
> http://yourinstall/upgrade.php to copy details from sitedeatils to ldap table
> 5. change from guest to ldap or one of the other authentication options in
> config.php by commenting/un-commenting the relevant line
> 6. If you are using Moodle for authentication read and follow the
> instructions in the moodle_integration_readme file
> 7. refresh index.php and test login and creation etc
>
> HTH
> Ron
>
> From: xerte-bounces at lists.nottingham.ac.uk
> [mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Remy Olasoji
> Sent: 10 September 2012 15:33
> To: xerte at lists.nottingham.ac.uk
> Subject: [Xerte] Upgrading xerte online toolkits to 1.8
>
>
> Hi,
>
> Could anyone point me to a set of instructions for the above please?  I am
> experiencing some problems upgrading on a Linux web server so will appreciate
> any help.
>
> Regards,
>
> Remy
>
>
> This message and any attachment are intended solely for the addressee and may
> contain confidential information. If you have received this message in error,
> please send it back to me, and immediately delete it. Please do not use, copy
> or disclose the information contained in this message or in any attachment.
> Any views or opinions expressed by the author of this email do not
> necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an attachment
> may still contain software viruses which could damage your computer system:
> you are advised to perform your own checks. Email communications with the
> University of Nottingham may be monitored as permitted by UK legislation.
>
>
> _______________________________________________
> Xerte mailing list
> Xerte at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte
>
>
> This message has been scanned by the UEL anti-spam filters hosted by Websense
>
>
>
> _______________________________________________
> Xerte mailing list
> Xerte at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte

_______________________________________________
Xerte mailing list
Xerte at lists.nottingham.ac.uk
http://lists.nottingham.ac.uk/mailman/listinfo/xerte

_______________________________________________
Xerte mailing list
Xerte at lists.nottingham.ac.uk
http://lists.nottingham.ac.uk/mailman/listinfo/xerte