[Xerte-dev] Re: V3 Release

Mon Jul 27 00:09:38 BST 2015

John could that be caching at your end? I was getting what you decribe but
the latest commit from Tom seems to have fixed that.

I'm using IE to test with.

Going to shut down now too.

Ron

-----Original Message-----
From: xerte-dev-bounces at lists.nottingham.ac.uk
[mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Smith, John
Sent: 26 July 2015 23:59
To: For Xerte technical developers
Subject: [Xerte-dev] Re: V3 Release

Hmm, just saw Ron's mail... perhaps it did and I have something else at
play. Please wait to see if Ron can reproduce the issue from the steps I
sent...

John Smith
Learning Technologist | School of Health & Life Sciences

T: +44 (0)141 331 3989 | E: J.J.Smith at gcu.ac.uk Glasgow Caledonian
University, Cowcaddens Road, Glasgow, G4 0BA, Scotland, United Kingdom
________________________________________
From: xerte-dev-bounces at lists.nottingham.ac.uk
[xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Smith, John
[J.J.Smith at gcu.ac.uk]
Sent: 26 July 2015 23:54
To: For Xerte technical developers
Subject: [Xerte-dev] Re: V3 Release

Sorry Tom, it didn't work... now 2 chars are being lost...

I don't actually think it was upload at all or at least not just that, It's
the code in the editor that takes the FileLocation and converts to a full
URL. The problem is now as follows

Upload an image in the editor and select it and it shows fine in the text
box Hit Play and the LO opens and you can see the image no problem, hence
upload.php did its job correctly Close the editor and reopen.
Now the image in the editor cannot be seen and examining the properties
shows .../edia/... so the 'm' has been lost just in the editor...

I can look in the morning but heading to bed now...

John Smith
Learning Technologist | School of Health & Life Sciences

T: +44 (0)141 331 3989 | E: J.J.Smith at gcu.ac.uk Glasgow Caledonian
University, Cowcaddens Road, Glasgow, G4 0BA, Scotland, United Kingdom
________________________________________
From: xerte-dev-bounces at lists.nottingham.ac.uk
[xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders
[reijnders at tor.nl]
Sent: 26 July 2015 23:02
To: For Xerte technical developers
Subject: [Xerte-dev] Re: V3 Release

Van you please check....

Thank you!
Tom

"I. Donkervoort | 12Change bv" <i.donkervoort at 12change.eu> schreef op 26
juli 2015 22:59:11 CEST:
Tom will fix this :)
It's probably in editor/upload.php
Greetings from Bordeaux

Ron Mitchell <ronm at mitchellmedia.co.uk> schreef op 26 juli 2015 22:39:23
CEST:

Oh dear - yes I can replicate that too John.

This is new though I think. For me it's happening via xampp which I've
updated over the weekend but not on the online install I've been testing
with which I updated on Friday.

-----Original Message-----
From: xerte-dev-bounces at lists.nottingham.ac.uk
[mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Smith, John
Sent: 26 July 2015 20:29
To: For Xerte technical developers
Subject: [Xerte-dev] Re: V3 Release

This is now also happening in all the Nottingham page types, but only after
the 2nd edit... and only media added in the text editor...

>From what I was seeing, first time you attach the image you get

....ham//media/im....   Notice the // but some/most servers accept that...

Then when you open the editor you get

....ham/media/im....   Notice only one / before media now which is
perfect

Then if you close editor again and reopen and save you get

....ham/edia/im....

Suspect its to do with the issue Julian or Tom was talking about the other
day moving the / from FileLocation to the the xml string...

John Smith
Learning Technologist | School of Health & Life Sciences

T: +44 (0)141 331 3989 | E: J.J.Smith at gcu.ac.uk Glasgow Caledonian
University, Cowcaddens Road, Glasgow, G4 0BA, Scotland, United Kingdom
________________________________

From: xerte-dev-bounces at lists.nottingham.ac.uk
[xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell
[ronm at mitchellmedia.co.uk]
Sent: 26 July 2015 19:12
To: 'For Xerte technical developers'
Subject: [Xerte-dev] Re: V3 Release

Would be good to fix #359 the issue with media in the decision template
before release:

Can't work out what's causing that but noticed that each time the editor is
opened th  e "media" part of the path becomes trimmed by one more letter
e.g.

http://localhost/xerte3/USER-FILES/26-guest2-decision/media/xerte_3_product_
box_new.png

http://localhost/xerte3/USER-FILES/26-guest2-decision/edia/xerte_3_product_b
ox_new.png

http://localhost/xerte3/USER-FILES/26-guest2-decision/dia/xerte_3_product_bo
x_new.png

http://localhost/xerte3/USER-FILES/26-guest2-decision/ia/xerte_3_product_box
_new.png

Ron

-----Original Message-----
From: xerte-dev-bounces at lists.nottingham.ac.uk
[mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders
Sent: 25 July 2015 16:35
To: For Xerte technical developers
Subject: [Xerte-dev] Re: V3 Release

I am fine with a release as well. I did work on the export functionality,
and that needs some testing.

I have prepared the merge into master (the new 3.0) and develop, but I will
no  t push this yet. Whenever you want me to push it, I'll push it and
remove 3.0-beta from the website.

Tom

Op 23-7-2015 om 15:43 schreef Smith, John:
 I thought it was only an IE10 issue... The NHS won't have that until  at
least Xerte v16.0 :-)

 Is this the editor lockup problem Ron reported?

 John Smith
 Learning Technologist | School of Health & Life Sciences

 T: +44 (0)141 331 3989 | E: J.J.Smith at gcu.ac.uk Glasgow Caledonian
University, Cowcaddens Road, Glasgow, G4 0BA, Scotland, United Kingdom
________________________________

 From: xerte-dev-bounces at lists.nottingham.ac.uk
 [xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney
[Julian.Tenney at nottingham.ac.uk]
 Sent: 23 July 2015 14:24
 To: For Xerte technical developers
 Subject: [Xerte-dev] Re:
  V3
Release

 use a better browser
 Quite. However, it isn't an option for the poor souls in the NHS still
having to use IE8.

 I definitely have no concerns about this release going ahead now.
 Good to know,

 -----Original Message-----
 From: xerte-dev-bounces at lists.nottingham.ac.uk
 [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Smith,  John
 Sent: 23 July 2015 14:19
 To: For Xerte technical developers
 Subject: [Xerte-dev] Re: V3 Release

 I've closed the Android one as it is mostly resolved. It was left open  due
to the reference to the iPad3 issue that Fay has been seeing but I think she
opened that as a separate issue too so it may now be closed. Not sure about
the IE10 issue either but as long as there is a workaround (use a better
browser) then it should be fine...

 I definitely have no concerns about this release going ahead now.

 John Smith
 Learning Technologist | School of Health & Life Sciences

 T: +44 (0)141 331 3989 | E: J.J.Smith at gcu.ac.uk Glasgow Caledonian
University, Cowcaddens Road, Glasgow, G4 0BA, Scotland, United Kingdom
________________________________

 From: xerte-dev-bounces at lists.nottingham.ac.uk
 [xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney
[Julian.Tenney at nottingham.ac.uk]
 Sent: 23 July 2015 13:23
 To:
For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk)
 Subject: [Xerte-dev] V3 Release

 Hi guys,

 We are very nearly ready to release v3: I'd like to do this on (or
 before)
Wednesday, which will be my last day in the office next week, so that gives
us a few days to put everything in place for the release: of the outstanding
issues, Tom is looking at the export one and we know how to fix that, so
that's no longer a concern; the android issue about the workspace has been
reported by both Ron and Inge as being mostly OK; the IE 10 one I don't know
how we are going to isolate, so I think we should roll with that: I've
removed the v3 release label from the issue.

 Our governance says we should vote on releases: if anyone objects to  this

 release
going ahead on Wednesday, now is the time to pipe up.

 We've all got a few days to carry on using / testing and fixing  whatever
we find.
 Tom, can we put in place whatever we need so that the release code is  on
the community website, and would you mind attending to the git things - v3
beta should  now be merged back into develop and master, right?

 I think this is the best release - by far - that we've made to date -
thanks to everyone for everything over the last 18 months or so as we've
worked on this, it's great stuff.

 Julian

 This message and any attachment are intended solely for the addressee  and
may contain confidential information. If you have received this message in
error, please send it back to me, and immediately delete it.

 Please do not use, copy or disclose the information contained in this
message or in any attachment.  Any views or opinions expressed by the author
of this email do not necessarily reflect the views of the University of
Nottingham.

 This message has been checked for viruses but the contents of an attachment
may still contain software viruses which could damage your computer system,
you are advised to perform your own checks. Email communications with the
University of Nottingham may be monitored as permitted by UK legislation.

 Glasgow Caledonian University is a registered Scottish charity, number
 SC021474

________________________________

 Xerte-dev mailing list
 Xerte-dev at lists.nottingham.ac.uk
 http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev

________________________________

 Xerte-dev mailing list
 Xerte-dev at lists.nottingham.ac.uk
 http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev

 This message and any attach
 ment
are intended solely for the addressee
 and may contain confidential information. If you have received this
message in error, please send it back to me, and immediately delete it.

 Please do not use, copy or disclose the information contained in this
message or in any attachment.  Any views or opinions expressed by the
author of this email do not necessarily reflect the views of the  University
of Nottingham.

 This message has been checked for viruses but the contents of an
attachment may still contain software viruses which could damage your
computer system, you are advised to perform your own checks. Email
communications with the University of Nottingham may be monitored as
permitted by UK legislation.

 Glasgow Caledonian University is a registered Scottish charity, number
 SC021474

________________________________

 Xerte-dev mailing list
 Xerte-dev at lists.nottingham.ac.uk
 http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev

 This message and any attachment are intended solely for the addressee  and
may contain confidential information. If you have received this  message in
error, please send it back to me, and immediately delete it.

 Please do not use, copy or disclose the information contained in this
message or in any attachment.  Any views or opinions expressed by the
author of this email do not necessarily reflect the views of the  University
of Nottingham.

 This message has been checked for viruses but the contents of an
attachment may still contain software viruses which could damage your
computer system, you are advised to perform your own checks. Email
communications with the University of Nottingham may be monitored as
permitted by UK legislation.

--
--

Tom Reijnders
TOR Informatica
Chopinlaan 27
5242HM Rosmalen
Tel: 073 5226191
Fax: 073 5226196

________________________________

Xerte-dev mailing list
Xerte-dev at lists.nottingham.ac.uk
http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev