[Xerte] How to address contents in the rootIcon

Peter Huppertz peter.huppertz at baselgovernance.org
Thu Jan 15 09:22:28 GMT 2009


Hi Julian,

I had a look at the examples and it looks indeed impressive and convinces 
me to reserve some more time to explore Xerte. I really like to learn from 
examples - so is it possible to get the source code (the rlo project file) 
of some of the examples?

Peter




From:
Julian Tenney <Julian.Tenney at nottingham.ac.uk>
To:
"Xerte discussion list" <xerte at lists.nottingham.ac.uk>
Date:
01/14/2009 01:35 PM
Subject:
RE: [Xerte] How to address contents in the rootIcon
Sent by:
xerte-bounces at lists.nottingham.ac.uk



Here are some good examples of Xerte content, both custom content and the 
default interface.
 
http://www.nottingham.ac.uk/toolkits/play_560
Shows all of the page types you can create  with the pageTemplates Xerte 
template. If your technical skills are low, or you don’t write any code, 
this is a good example of the sort of content you can quite easily create.
 
Here is an example of real-life content created with toolkits by 
non-technical people
http://www.nottingham.ac.uk/toolkits/play_264
 
This is a good example of a toolkits project, extended with cutom flash 
movies to add in additional functionality not available in the template 
directly
http://www.nottingham.ac.uk/toolkits/play_508
 
This example uses the default interface, but custmises it a little bit:
http://www.nottingham.ac.uk/toolkits/play_159
 
This is template that uses a custom interface
http://www.nottingham.ac.uk/toolkits/play_244
 
This is a project using a custom swf to control it:
 
These are completely custom projects, from the ground up, that show quite 
well what Xerte is capable of:
http://equella.nottingham.ac.uk/uon/items/7574a3e9-af2b-c959-7dc4-39b717fa50d8/1/ViewIMS.jsp
http://equella.nottingham.ac.uk/uon/items/0abf92ff-54cf-1cc2-aaff-cebf2fa073c0/1/ViewIMS.jsp
http://equella.nottingham.ac.uk/uon/items/e04e898f-45d0-98bc-04c2-437a7860bd89/1/ViewIMS.jsp
 
Hope that helps,
 
J
 
 
 
 
 
From: xerte-bounces at lists.nottingham.ac.uk [
mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney
Sent: Wednesday, January 14, 2009 11:53 AM
To: Xerte discussion list
Subject: RE: [Xerte] How to address contents in the rootIcon
 
The property is .controller – that’s the loaded swf. You need to make sure 
that it’s loaded before you can address it’s properties,
 
J
 
From: xerte-bounces at lists.nottingham.ac.uk [
mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of Peter Huppertz
Sent: Wednesday, January 14, 2009 11:30 AM
To: xerte at lists.nottingham.ac.uk
Subject: [Xerte] How to address contents in the rootIcon
 
Hi List, 

I'm quite new to Xerte and try to create my first project using a custom 
made interface. The layout of the interface uses two different boxed to 
organize the content. Each box is a movieclip on the main timeline of the 
interface.swf file. I want to change the width of these boxes using 
scripts in Xerte. So I tried rootIcon.box1._width = 400 and 
rootIcon.clip.box1._width = 400 and even rootIcon.swf.box1._width = 400 - 
no luck. I couldn't find a hint in the Xerte help ... can you help me? 

By the way: are there any complex learning objects out there that use 
custom made interfaces, combinations of built in functionalities and 
externally loaded flash files, etc. to learn from? 

Thanks, 

Peter 

==================================
Peter Huppertz
E-learning and IT Specialist
International Centre for Asset Recovery
Basel Institute on Governance
Phone: +41 61 205 55 18
Fax: +41 61 267 55 19_______________________________________________
Xerte mailing list
Xerte at lists.nottingham.ac.uk
http://lists.nottingham.ac.uk/mailman/listinfo/xerte



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.nottingham.ac.uk/pipermail/xerte/attachments/20090115/9ac38522/attachment.html


More information about the Xerte mailing list