[Xerte] Editing products of templates?

[Lockley Patrick]

Well the innards aren't my part of the world (I'm helping to extend the
xerte template into an online xerte suite).

I think you'd be ok cutting and pasting template xml, I wouldn't want to
cut and paste normal xerte xml.

Have you the scorm test suite?

http://www.adlnet.gov/downloads/downloadPage.aspx?id=277

I use that to test my packages. It's a bit fiddly but it tells you
pretty quickly why they don't work.

If it's a small zip (shall we say under 8 meg or so) email me and I can
test (please don't email it to the list though). 

Cheers

-----Original Message-----
From: xerte-bounces at lists.nottingham.ac.uk
[mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of
jventola at verizon.net
Sent: 14 July 2008 16:18
To: Xerte discussion list
Subject: RE: [Xerte] Editing products of templates?

Thanks, Pat.

That helps a lot.  It sounds like merging is pretty tough at the
moment--cutting and pasting xml sounds daunting since you have to keep
the proper structure.  

My new problem is that the unit I prepared with the pages template and
published as scorm will not load into WebCT.  That could be a problem at
the college, although I was able to load scorms that I made without
using a wizard.

Over the weekend I looked up xmlx and sawmill--Xerte has some intersting
innards.

Jim


Date sent:      	Mon, 14 Jul 2008 14:48:15 +0100
From:           	"Lockley Patrick"
<Patrick.Lockley at nottingham.ac.uk>
Subject:        	RE: [Xerte] Editing products of templates?
To:             	"Xerte discussion list"
<xerte at lists.nottingham.ac.uk>
Send reply to:  	Xerte discussion list
<xerte at lists.nottingham.ac.uk>

> Hello,
> 
> Sorry for the delay on this one as it's more advanced than I'm used to
> :)
> 
> The RLT - Holds all the code and complicated actions to allow the xml 
> to work when ran in the player.
> The XWD is a Xerte Wizard - this configures the page types of the 
> wizard The XML is the data made by using the template and wizard
> 
> If you open the RLT, it will use the XML file to populate itself - 
> changes are saved then saved to the XML.
> 
> The XML needs the other two parts to make sense of it. Xerte normally 
> opens and saves RLOs - but this is when you've not set up a template.
> 
> If you want to do two different things (features wise) make two 
> templates (a basic file set is one RLT, one xwd and one initial XML - 
> only the XML will change as the user develops it).
> 
> Merging across templates would involve cuting and pasting XML at the 
> moment.
> 
> I'm not sure on the file types - an XTP is all the files a template 
> would need (it's a zip file renamed).
> 
> Hope this helps (Julian will be back next week with no doubt a better 
> answer).
> 
> Pat
> 
> -----Original Message-----
> From: xerte-bounces at lists.nottingham.ac.uk
> [mailto:xerte-bounces at lists.nottingham.ac.uk] On Behalf Of 
> jventola at verizon.net
> Sent: 11 July 2008 19:50
> To: xerte at lists.nottingham.ac.uk
> Subject: [Xerte] Editing products of templates?
> 
> Executive Summary: After I make a lesson with a wizard (template?) how

> do I edit it in full Xerte and merge it with another lesson?
> 
> I finally got around to exploring the Xerte install folder and 
> discovered Wizard/pageTemplates.xtp.  Wow. Wonderful.  Where has this 
> been all week?  With this wizard, I can do just about everything I 
> need including a quiz with individual feedback.
> Brilliant. 
> 
> But I do not understand templates in Xerte.  I need an overview.
> Usually, you load a template and use it to make and save a new 
> document (as in Word) and the resulting doc is editable in the 
> application software.  So  I would have expected to end up with an rlo

> file that I could then open in Xerte.  But the template interface can 
> only save another template.
> (That's bearable since I can just publish it or package it.)  But, say

> I want to change a propety like streaming or loop or play on the 
> sound.  I cannot load the file into Xerte except as a template and 
> that template may not offer the option.  If I close the template, I 
> see Xerte, but I do not have my lesson to edit--only the logic of the
wizard.
> 
> I haven't gotten around to models yet.  Maybe that is how you do it?
> And is that how you merge stuff created with one template into a 
> presentation begun with another?  Suppose I had two templates, each of

> which makes doing something I want in one lesson easy.  How do I 
> manage that?
> 
> Similarly, what are all the filetypes of Xerte?  In the Xerte folder I

> see ico files for rlo, rla, rlm, and rlt--not to mention xlm and xwd.
> And the pageTemplate is an xtp file.  Is this explained anywhere?  
> 
> Thanks again for the help.
> _______________________________________________
> Xerte mailing list
> Xerte at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte
> _______________________________________________
> Xerte mailing list
> Xerte at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte
> 
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.4.10/1551 - Release Date: 
> 7/14/2008 6:49 AM
> 
> 


_______________________________________________
Xerte mailing list
Xerte at lists.nottingham.ac.uk
http://lists.nottingham.ac.uk/mailman/listinfo/xerte