From Julian.Tenney at nottingham.ac.uk Fri Dec 4 09:25:01 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Fri, 4 Dec 2015 09:25:01 +0000 Subject: [Xerte-dev] oEmbed Message-ID: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> http://oembed.com/ Of interest? Should we implement it do you think? -------------- next part -------------- An HTML attachment was scrubbed... URL: From reijnders at tor.nl Fri Dec 4 10:50:18 2015 From: reijnders at tor.nl (Tom Reijnders) Date: Fri, 4 Dec 2015 11:50:18 +0100 Subject: [Xerte-dev] Re: oEmbed In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> References: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <56616FEA.3050002@tor.nl> This is already enabled in the wysiwig editor (I've included the oEmbed plugin) See editor/js/vendor/ckeditor/plugins/oembed/README.md Op 4-12-2015 om 10:25 schreef Julian Tenney: > > http://oembed.com/ > > Of interest? Should we implement it do you think? > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 -------------- next part -------------- An HTML attachment was scrubbed... URL: From info at pgogywebstuff.com Fri Dec 4 10:54:16 2015 From: info at pgogywebstuff.com (Pat Lockley (Pgogy)) Date: Fri, 04 Dec 2015 05:54:16 -0500 Subject: [Xerte-dev] Re: oEmbed In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> References: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <5495d44a91f25b498572be23ca266c8f@pgogywebstuff.com> Been around for ages - now used a lot as twitter supports it. I wonder if for most users the iframe is the same, though the moodle filter probably covers the main usage case? On 2015-12-04 04:25, Julian Tenney wrote: > http://oembed.com/ [1] > > Of interest? Should we implement it do you think? > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete > it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > > > > Links: > ------ > [1] http://oembed.com/ > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- Pgogy Webstuff pgogywebstuff.com From Julian.Tenney at nottingham.ac.uk Fri Dec 4 10:56:04 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Fri, 4 Dec 2015 10:56:04 +0000 Subject: [Xerte-dev] Re: oEmbed In-Reply-To: <56616FEA.3050002@tor.nl> References: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> <56616FEA.3050002@tor.nl> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604722556@UiWexMBX08.ad.nottingham.ac.uk> I wondered about implementing it so you could embed Xerte LOs with it, rather than embedding content from other sites into an LO. I think Pat might be right though, people just use iframe. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 04 December 2015 10:50 To: For Xerte technical developers Subject: [Xerte-dev] Re: oEmbed This is already enabled in the wysiwig editor (I've included the oEmbed plugin) See editor/js/vendor/ckeditor/plugins/oembed/README.md Op 4-12-2015 om 10:25 schreef Julian Tenney: http://oembed.com/ Of interest? Should we implement it do you think? This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 -------------- next part -------------- An HTML attachment was scrubbed... URL: From info at pgogywebstuff.com Fri Dec 4 11:04:33 2015 From: info at pgogywebstuff.com (Pat Lockley (Pgogy)) Date: Fri, 04 Dec 2015 06:04:33 -0500 Subject: [Xerte-dev] Re: oEmbed In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604722556@UiWexMBX08.ad.nottingham.ac.uk> References: <5C33B277BFD6E9458C6D394195F98CF604722232@UiWexMBX08.ad.nottingham.ac.uk> <56616FEA.3050002@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604722556@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <1447fa0f4b04cb5f37591bdd7e2b4189@pgogywebstuff.com> oEmbed might be neater than iframe though, if url changes or so on What is the support for oembed on VLEs? On 2015-12-04 05:56, Julian Tenney wrote: > I wondered about implementing it so you could embed Xerte LOs with it, > rather than embedding content from other sites into an LO. > > I think Pat might be right though, people just use iframe. > > FROM: xerte-dev-bounces at lists.nottingham.ac.uk > [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] ON BEHALF OF Tom > Reijnders > SENT: 04 December 2015 10:50 > TO: For Xerte technical developers > SUBJECT: [Xerte-dev] Re: oEmbed > > This is already enabled in the wysiwig editor (I've included the > oEmbed plugin) > > See editor/js/vendor/ckeditor/plugins/oembed/README.md > > Op 4-12-2015 om 10:25 schreef Julian Tenney: > >> http://oembed.com/ [2] >> >> Of interest? Should we implement it do you think? >> >> This message and any attachment are intended solely for the >> addressee >> >> and may contain confidential information. If you have received this >> >> message in error, please send it back to me, and immediately delete >> it. >> >> Please do not use, copy or disclose the information contained in >> this >> >> message or in any attachment. Any views or opinions expressed by the >> >> author of this email do not necessarily reflect the views of the >> >> University of Nottingham. >> >> This message has been checked for viruses but the contents of an >> >> attachment may still contain software viruses which could damage >> your >> >> computer system, you are advised to perform your own checks. Email >> >> communications with the University of Nottingham may be monitored as >> >> permitted by UK legislation. >> >> _______________________________________________ >> >> Xerte-dev mailing list >> >> Xerte-dev at lists.nottingham.ac.uk >> >> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev [1] > > -- > > -- > > Tom Reijnders > > TOR Informatica > > Chopinlaan 27 > > 5242HM Rosmalen > > Tel: 073 5226191 > > Fax: 073 5226196 > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete > it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > > > > Links: > ------ > [1] http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > [2] http://oembed.com/ > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- Pgogy Webstuff pgogywebstuff.com From Julian.Tenney at nottingham.ac.uk Tue Dec 8 08:01:44 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Tue, 8 Dec 2015 08:01:44 +0000 Subject: [Xerte-dev] Release Message-ID: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Tue Dec 8 09:38:06 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Tue, 8 Dec 2015 09:38:06 -0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <001e01d1319c$25713390$70539ab0$@co.uk> Two small things I would like to change/add in time for the release but before I make the changes just to check. 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Julian.Tenney at nottingham.ac.uk Tue Dec 8 12:52:54 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Tue, 8 Dec 2015 12:52:54 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <001e01d1319c$25713390$70539ab0$@co.uk> References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> <001e01d1319c$25713390$70539ab0$@co.uk> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604724506@UiWexMBX08.ad.nottingham.ac.uk> Those sound sensible to me, go for it. I haven't made any changes. I guess the most important thing to test is setup, as there are a few changes there from John Horne's contributions, and it is something that should just work. As far as the authoring side of things, not too many new issues have surfaced this time, so I feel quite relaxed about it. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 09:38 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Two small things I would like to change/add in time for the release but before I make the changes just to check... 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Tue Dec 8 14:48:05 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Tue, 8 Dec 2015 14:48:05 -0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604724506@UiWexMBX08.ad.nottingham.ac.uk> References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> <001e01d1319c$25713390$70539ab0$@co.uk> <5C33B277BFD6E9458C6D394195F98CF604724506@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <009b01d131c7$73692aa0$5a3b7fe0$@co.uk> Ok will make those changes later or tomorrow. Did you mean John or Len's changes? I tested setup with latest develop yesterday and seemed to work well. That said I seem to recall there was a plan if not a branch to change the control of the authentication option to setup/management rather than auth_config.php but that's not in develop yet. Not sure if Tom hopes to get that in for Friday? Did you and Fay work any further on that translated document? From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 12:53 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Those sound sensible to me, go for it. I haven't made any changes. I guess the most important thing to test is setup, as there are a few changes there from John Horne's contributions, and it is something that should just work. As far as the authoring side of things, not too many new issues have surfaced this time, so I feel quite relaxed about it. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 09:38 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Two small things I would like to change/add in time for the release but before I make the changes just to check. 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Julian.Tenney at nottingham.ac.uk Tue Dec 8 14:50:14 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Tue, 8 Dec 2015 14:50:14 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <009b01d131c7$73692aa0$5a3b7fe0$@co.uk> References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> <001e01d1319c$25713390$70539ab0$@co.uk> <5C33B277BFD6E9458C6D394195F98CF604724506@UiWexMBX08.ad.nottingham.ac.uk> <009b01d131c7$73692aa0$5a3b7fe0$@co.uk> Message-ID: <5C33B277BFD6E9458C6D394195F98CF60472488E@UiWexMBX08.ad.nottingham.ac.uk> Well, both actually. Not had a chance to work on the translation I'm afraid, plenty of real work to do. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 14:48 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Ok will make those changes later or tomorrow. Did you mean John or Len's changes? I tested setup with latest develop yesterday and seemed to work well. That said I seem to recall there was a plan if not a branch to change the control of the authentication option to setup/management rather than auth_config.php but that's not in develop yet. Not sure if Tom hopes to get that in for Friday? Did you and Fay work any further on that translated document? From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 12:53 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Those sound sensible to me, go for it. I haven't made any changes. I guess the most important thing to test is setup, as there are a few changes there from John Horne's contributions, and it is something that should just work. As far as the authoring side of things, not too many new issues have surfaced this time, so I feel quite relaxed about it. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 09:38 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Two small things I would like to change/add in time for the release but before I make the changes just to check... 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From Fay.Cross at nottingham.ac.uk Wed Dec 9 07:32:11 2015 From: Fay.Cross at nottingham.ac.uk (Fay Cross) Date: Wed, 9 Dec 2015 07:32:11 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <001e01d1319c$25713390$70539ab0$@co.uk> References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> <001e01d1319c$25713390$70539ab0$@co.uk> Message-ID: Yes, you're right about the decision xwd - it's not in the src folder just in the module itself. Maybe it should be but I don't think I put it there as unlike the other modules it doesn't ever need to be rebuilt (can't add new pages etc.). I did start looking at the translated document when I first shared it with you but I haven't got very far with it - nothing worth sharing yet. I'm not sure when I'll get a chance to look at it again. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 09:38 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Two small things I would like to change/add in time for the release but before I make the changes just to check... 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Wed Dec 9 10:36:01 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Wed, 9 Dec 2015 10:36:01 -0000 Subject: [Xerte-dev] Re: Release In-Reply-To: References: <5C33B277BFD6E9458C6D394195F98CF604723D7D@UiWexMBX08.ad.nottingham.ac.uk> <001e01d1319c$25713390$70539ab0$@co.uk> Message-ID: <004e01d1326d$673ba040$35b2e0c0$@co.uk> Thanks Fay I tested and committed these changes. Obviously not for this next release but I wonder if there is a cleverer and online way we can do some of the documentation to allow for easier if not seamless translation. Something to discuss further in 2016! From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Fay Cross Sent: 09 December 2015 07:32 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Yes, you're right about the decision xwd - it's not in the src folder just in the module itself. Maybe it should be but I don't think I put it there as unlike the other modules it doesn't ever need to be rebuilt (can't add new pages etc.). I did start looking at the translated document when I first shared it with you but I haven't got very far with it - nothing worth sharing yet. I'm not sure when I'll get a chance to look at it again. From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 08 December 2015 09:38 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Two small things I would like to change/add in time for the release but before I make the changes just to check. 1. Any reason not to change the styles option in the site template to type="script" rather than type="TextArea"? Since we've had the new editor that currently appears as a normal text box with the toolbar option which has an impact on the way it works or at lease the ease of adding css. Also this should be changed in \src\site\wizards\en-GB\basic.xwd then run the batch? 2. I'd like to add a similar option to the separate decision template and have that working locally. But before I add and commit just to check the following: a) The xwd for decision is in \modules\decision\parent_templates\decision\wizards\en-GB\data.xwd e.g. not in \src? To get this working I added to that xwd. Added $head; to the var declaration and then $head = $("head"); Then in // _____ SET UP INTERFACE _____ if (allParams.styles != undefined){ $head.append(''); } b) This all works but wanted to check this is all correct? Anything we need to test before the update? Ron From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 08 December 2015 08:02 To: For Xerte technical developers (xerte-dev at lists.nottingham.ac.uk) Subject: [Xerte-dev] Release Hi, Just wanted to check in that we will still be on track to do the 3.1 release on Friday? J This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Wed Dec 9 17:36:14 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Wed, 9 Dec 2015 17:36:14 -0000 Subject: [Xerte-dev] api_keys.php is your youtube key still working? Message-ID: <002301d132a8$1b6feeb0$524fcc10$@co.uk> Hi all is your YouTube feed page still working? e.g. where you've added a key previously and tested that it works? I thought this might be an issue with the latest develop branch but I have earlier v3 tests that don't seem to be working now either. Not sure if it's a problem with my key or a wider issue so is yours still working? Ron -------------- next part -------------- An HTML attachment was scrubbed... URL: From Julian.Tenney at nottingham.ac.uk Wed Dec 9 17:42:02 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Wed, 9 Dec 2015 17:42:02 +0000 Subject: [Xerte-dev] Re: api_keys.php is your youtube key still working? In-Reply-To: <002301d132a8$1b6feeb0$524fcc10$@co.uk> References: <002301d132a8$1b6feeb0$524fcc10$@co.uk> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604725B2C@UiWexMBX08.ad.nottingham.ac.uk> will look tomorrow. I wish they maied key ownes with changes: they have your gmail address, why cant they be a bit more pro active in terms of letting people use the API know about things changing: but perhaps it's not a change. Will test. ________________________________________ From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Ron Mitchell [ronm at mitchellmedia.co.uk] Sent: 09 December 2015 17:36 To: 'For Xerte technical developers' Subject: [Xerte-dev] api_keys.php is your youtube key still working? Hi all is your YouTube feed page still working? e.g. where you've added a key previously and tested that it works? I thought this might be an issue with the latest develop branch but I have earlier v3 tests that don't seem to be working now either. Not sure if it's a problem with my key or a wider issue so is yours still working? Ron From ronm at mitchellmedia.co.uk Thu Dec 10 08:34:32 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Thu, 10 Dec 2015 08:34:32 -0000 Subject: [Xerte-dev] Re: api_keys.php is your youtube key still working? In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604725B2C@UiWexMBX08.ad.nottingham.ac.uk> References: <002301d132a8$1b6feeb0$524fcc10$@co.uk> <5C33B277BFD6E9458C6D394195F98CF604725B2C@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <001701d13325$991b3a40$cb51aec0$@co.uk> It's still working on your page types LO but I'm trying to establish whether it's an issue with our code changes since the v3 release or a problem with my key. I seem to recal there were some changes to deal with export etc. Does it work on your develop installations? Are you using a client or server key? Either way do you have referer/IP's added in the developer console or left empty? Cheers Ron -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 09 December 2015 17:42 To: For Xerte technical developers Subject: [Xerte-dev] Re: api_keys.php is your youtube key still working? will look tomorrow. I wish they maied key ownes with changes: they have your gmail address, why cant they be a bit more pro active in terms of letting people use the API know about things changing: but perhaps it's not a change. Will test. ________________________________________ From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Ron Mitchell [ronm at mitchellmedia.co.uk] Sent: 09 December 2015 17:36 To: 'For Xerte technical developers' Subject: [Xerte-dev] api_keys.php is your youtube key still working? Hi all is your YouTube feed page still working? e.g. where you've added a key previously and tested that it works? I thought this might be an issue with the latest develop branch but I have earlier v3 tests that don't seem to be working now either. Not sure if it's a problem with my key or a wider issue so is yours still working? Ron _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. From reijnders at tor.nl Sun Dec 13 12:32:23 2015 From: reijnders at tor.nl (Tom Reijnders) Date: Sun, 13 Dec 2015 13:32:23 +0100 Subject: [Xerte-dev] Release Message-ID: <566D6557.40007@tor.nl> All my fixes and additions are in there now (fixed issue with installing on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable Grid). The most annoying change (for the end-users) is moving Authentication to the management.php. It means that after upgrading to 3.1, people HAVE to run upgrade.php, and than correct the authentication in management.php The advantage is obvious: - Easier install (you set the authentication during the install) - Easier future upgrades, the authentication will not be overwritten. When do you want me to prepare the release? Tom -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 From Julian.Tenney at nottingham.ac.uk Sun Dec 13 12:37:09 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Sun, 13 Dec 2015 12:37:09 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <566D6557.40007@tor.nl> References: <566D6557.40007@tor.nl> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> as soon as you can, if there are no objections? Thanks a lot Tom ________________________________________ From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders [reijnders at tor.nl] Sent: 13 December 2015 12:32 To: 'For Xerte technical developers' Subject: [Xerte-dev] Release All my fixes and additions are in there now (fixed issue with installing on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable Grid). The most annoying change (for the end-users) is moving Authentication to the management.php. It means that after upgrading to 3.1, people HAVE to run upgrade.php, and than correct the authentication in management.php The advantage is obvious: - Easier install (you set the authentication during the install) - Easier future upgrades, the authentication will not be overwritten. When do you want me to prepare the release? Tom -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev From reijnders at tor.nl Sun Dec 13 13:41:09 2015 From: reijnders at tor.nl (Tom Reijnders) Date: Sun, 13 Dec 2015 14:41:09 +0100 Subject: [Xerte-dev] Re: Release In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <566D7575.5010607@tor.nl> Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: > as soon as you can, if there are no objections? > > Thanks a lot Tom > ________________________________________ > From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders [reijnders at tor.nl] > Sent: 13 December 2015 12:32 > To: 'For Xerte technical developers' > Subject: [Xerte-dev] Release > > All my fixes and additions are in there now (fixed issue with installing > on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable Grid). > > The most annoying change (for the end-users) is moving Authentication to > the management.php. It means that after upgrading to 3.1, people HAVE to > run upgrade.php, and than correct the authentication in management.php > > The advantage is obvious: > - Easier install (you set the authentication during the install) > - Easier future upgrades, the authentication will not be overwritten. > > When do you want me to prepare the release? > > Tom > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 From reijnders at tor.nl Sun Dec 13 20:59:31 2015 From: reijnders at tor.nl (Tom Reijnders) Date: Sun, 13 Dec 2015 21:59:31 +0100 Subject: [Xerte-dev] Re: Release In-Reply-To: <566D7575.5010607@tor.nl> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> Message-ID: Julian, Could you write some news release? Tom Tom Reijnders schreef op 13 december 2015 14:41:09 CET: >Done... > > >Op 13-12-2015 om 13:37 schreef Julian Tenney: >> as soon as you can, if there are no objections? >> >> Thanks a lot Tom >> ________________________________________ >> From: xerte-dev-bounces at lists.nottingham.ac.uk >[xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders >[reijnders at tor.nl] >> Sent: 13 December 2015 12:32 >> To: 'For Xerte technical developers' >> Subject: [Xerte-dev] Release >> >> All my fixes and additions are in there now (fixed issue with >installing >> on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable >Grid). >> >> The most annoying change (for the end-users) is moving Authentication >to >> the management.php. It means that after upgrading to 3.1, people HAVE >to >> run upgrade.php, and than correct the authentication in >management.php >> >> The advantage is obvious: >> - Easier install (you set the authentication during the install) >> - Easier future upgrades, the authentication will not be >overwritten. >> >> When do you want me to prepare the release? >> >> Tom >> >> -- >> -- >> >> Tom Reijnders >> TOR Informatica >> Chopinlaan 27 >> 5242HM Rosmalen >> Tel: 073 5226191 >> Fax: 073 5226196 >> >> >> _______________________________________________ >> Xerte-dev mailing list >> Xerte-dev at lists.nottingham.ac.uk >> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev >> >> _______________________________________________ >> Xerte-dev mailing list >> Xerte-dev at lists.nottingham.ac.uk >> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev >> >> >> >> >> This message and any attachment are intended solely for the addressee >> and may contain confidential information. If you have received this >> message in error, please send it back to me, and immediately delete >it. >> >> Please do not use, copy or disclose the information contained in this >> message or in any attachment. Any views or opinions expressed by the >> author of this email do not necessarily reflect the views of the >> University of Nottingham. >> >> This message has been checked for viruses but the contents of an >> attachment may still contain software viruses which could damage your >> computer system, you are advised to perform your own checks. Email >> communications with the University of Nottingham may be monitored as >> permitted by UK legislation. >> > >-- >-- > >Tom Reijnders >TOR Informatica >Chopinlaan 27 >5242HM Rosmalen >Tel: 073 5226191 >Fax: 073 5226196 > > >_______________________________________________ >Xerte-dev mailing list >Xerte-dev at lists.nottingham.ac.uk >http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > >This message and any attachment are intended solely for the addressee >and may contain confidential information. If you have received this >message in error, please send it back to me, and immediately delete it. > > >Please do not use, copy or disclose the information contained in this >message or in any attachment. Any views or opinions expressed by the >author of this email do not necessarily reflect the views of the >University of Nottingham. > >This message has been checked for viruses but the contents of an >attachment may still contain software viruses which could damage your >computer system, you are advised to perform your own checks. Email >communications with the University of Nottingham may be monitored as >permitted by UK legislation. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Sun Dec 13 21:19:21 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Sun, 13 Dec 2015 21:19:21 -0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <566D7575.5010607@tor.nl> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> Message-ID: <001901d135eb$f0bdeae0$d239c0a0$@co.uk> It would have been better if the change to authentication now being controlled via management wasn't enforced e.g. renaming the new auth_config.php to auth_config_dist.php but I've updated and committed the upgrade and moodle integration guides to account for this change. Committed to develop. I haven't updated the installation guide but that's been out of date for a while really and is a bigger task to update. Ron -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 13 December 2015 13:41 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: > as soon as you can, if there are no objections? > > Thanks a lot Tom > ________________________________________ > From: xerte-dev-bounces at lists.nottingham.ac.uk > [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders > [reijnders at tor.nl] > Sent: 13 December 2015 12:32 > To: 'For Xerte technical developers' > Subject: [Xerte-dev] Release > > All my fixes and additions are in there now (fixed issue with > installing on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable Grid). > > The most annoying change (for the end-users) is moving Authentication > to the management.php. It means that after upgrading to 3.1, people > HAVE to run upgrade.php, and than correct the authentication in > management.php > > The advantage is obvious: > - Easier install (you set the authentication during the install) > - Easier future upgrades, the authentication will not be overwritten. > > When do you want me to prepare the release? > > Tom > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. From Julian.Tenney at nottingham.ac.uk Mon Dec 14 10:48:12 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Mon, 14 Dec 2015 10:48:12 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <001901d135eb$f0bdeae0$d239c0a0$@co.uk> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> <001901d135eb$f0bdeae0$d239c0a0$@co.uk> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604727C51@UiWexMBX08.ad.nottingham.ac.uk> Not sure I fully grasp the subtleties of this, do you want to change anything? -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 13 December 2015 21:19 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release It would have been better if the change to authentication now being controlled via management wasn't enforced e.g. renaming the new auth_config.php to auth_config_dist.php but I've updated and committed the upgrade and moodle integration guides to account for this change. Committed to develop. I haven't updated the installation guide but that's been out of date for a while really and is a bigger task to update. Ron -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 13 December 2015 13:41 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: > as soon as you can, if there are no objections? > > Thanks a lot Tom > ________________________________________ > From: xerte-dev-bounces at lists.nottingham.ac.uk > [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders > [reijnders at tor.nl] > Sent: 13 December 2015 12:32 > To: 'For Xerte technical developers' > Subject: [Xerte-dev] Release > > All my fixes and additions are in there now (fixed issue with > installing on HTTPS, and added wysiwyg flag to grid, and used it in > the Sortable Grid). > > The most annoying change (for the end-users) is moving Authentication > to the management.php. It means that after upgrading to 3.1, people > HAVE to run upgrade.php, and than correct the authentication in > management.php > > The advantage is obvious: > - Easier install (you set the authentication during the install) > - Easier future upgrades, the authentication will not be overwritten. > > When do you want me to prepare the release? > > Tom > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev From Julian.Tenney at nottingham.ac.uk Mon Dec 14 10:48:27 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Mon, 14 Dec 2015 10:48:27 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604727C5C@UiWexMBX08.ad.nottingham.ac.uk> Sure, I will do, From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 13 December 2015 21:00 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Julian, Could you write some news release? Tom Tom Reijnders > schreef op 13 december 2015 14:41:09 CET: Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: as soon as you can, if there are no objections? Thanks a lot Tom ________________________________ From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders [reijnders at tor.nl] Sent: 13 December 2015 12:32 To: 'For Xerte technical developers' Subject: [Xerte-dev] Release All my fixes and additions are in there now (fixed issue with installing on HTTPS, and added wysiwyg flag to grid, and used it in the Sortable Grid). The most annoying change (for the end-users) is moving Authentication to the management.php. It means that after upgrading to 3.1, people HAVE to run upgrade.php, and than correct the authentication in management.php The advant age is obvious: - Easier install (you set the authentication during the install) - Easier future upgrades, the authentication will not be overwritten. When do you want me to prepare the release? Tom -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 ________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev ________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. -- Sent from my Android device with K-9 Mail. Please excuse my brevity. -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Mon Dec 14 11:35:59 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Mon, 14 Dec 2015 11:35:59 -0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <5C33B277BFD6E9458C6D394195F98CF604727C51@UiWexMBX08.ad.nottingham.ac.uk> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> <001901d135eb$f0bdeae0$d239c0a0$@co.uk> <5C33B277BFD6E9458C6D394195F98CF604727C51@UiWexMBX08.ad.nottingham.ac.uk> Message-ID: <004f01d13663$9bc3fcf0$d34bf6d0$@co.uk> Tom described it as "The most annoying change (for the end-users)" and really that means just those upgrading because it now involves more steps rather than just the single step of commenting/uncommenting auth_config.php or not overwriting auth_config.php in the first place. e.g. update the code, run upgrade.php, visit management and change auth back to what it was. So it needed the guidance to be updated and inevitably we're going to get support requests by those who don't read or follow that guidance. Longer term in theory at least it's a benefit because no need to protect auth_config.php in future. -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 14 December 2015 10:48 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Not sure I fully grasp the subtleties of this, do you want to change anything? -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 13 December 2015 21:19 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release It would have been better if the change to authentication now being controlled via management wasn't enforced e.g. renaming the new auth_config.php to auth_config_dist.php but I've updated and committed the upgrade and moodle integration guides to account for this change. Committed to develop. I haven't updated the installation guide but that's been out of date for a while really and is a bigger task to update. Ron -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 13 December 2015 13:41 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: > as soon as you can, if there are no objections? > > Thanks a lot Tom > ________________________________________ > From: xerte-dev-bounces at lists.nottingham.ac.uk > [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders > [reijnders at tor.nl] > Sent: 13 December 2015 12:32 > To: 'For Xerte technical developers' > Subject: [Xerte-dev] Release > > All my fixes and additions are in there now (fixed issue with > installing on HTTPS, and added wysiwyg flag to grid, and used it in > the Sortable Grid). > > The most annoying change (for the end-users) is moving Authentication > to the management.php. It means that after upgrading to 3.1, people > HAVE to run upgrade.php, and than correct the authentication in > management.php > > The advantage is obvious: > - Easier install (you set the authentication during the install) > - Easier future upgrades, the authentication will not be overwritten. > > When do you want me to prepare the release? > > Tom > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. From Julian.Tenney at nottingham.ac.uk Mon Dec 14 11:44:47 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Mon, 14 Dec 2015 11:44:47 +0000 Subject: [Xerte-dev] Re: Release In-Reply-To: <004f01d13663$9bc3fcf0$d34bf6d0$@co.uk> References: <566D6557.40007@tor.nl> <5C33B277BFD6E9458C6D394195F98CF604727886@UiWexMBX08.ad.nottingham.ac.uk> <566D7575.5010607@tor.nl> <001901d135eb$f0bdeae0$d239c0a0$@co.uk> <5C33B277BFD6E9458C6D394195F98CF604727C51@UiWexMBX08.ad.nottingham.ac.uk> <004f01d13663$9bc3fcf0$d34bf6d0$@co.uk> Message-ID: <5C33B277BFD6E9458C6D394195F98CF604727E78@UiWexMBX08.ad.nottingham.ac.uk> OK. Sounds like a sensible change then, even though it means a bump in the road potentially. -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 14 December 2015 11:36 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release Tom described it as "The most annoying change (for the end-users)" and really that means just those upgrading because it now involves more steps rather than just the single step of commenting/uncommenting auth_config.php or not overwriting auth_config.php in the first place. e.g. update the code, run upgrade.php, visit management and change auth back to what it was. So it needed the guidance to be updated and inevitably we're going to get support requests by those who don't read or follow that guidance. Longer term in theory at least it's a benefit because no need to protect auth_config.php in future. -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Julian Tenney Sent: 14 December 2015 10:48 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Not sure I fully grasp the subtleties of this, do you want to change anything? -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 13 December 2015 21:19 To: 'For Xerte technical developers' Subject: [Xerte-dev] Re: Release It would have been better if the change to authentication now being controlled via management wasn't enforced e.g. renaming the new auth_config.php to auth_config_dist.php but I've updated and committed the upgrade and moodle integration guides to account for this change. Committed to develop. I haven't updated the installation guide but that's been out of date for a while really and is a bigger task to update. Ron -----Original Message----- From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Tom Reijnders Sent: 13 December 2015 13:41 To: For Xerte technical developers Subject: [Xerte-dev] Re: Release Done... Op 13-12-2015 om 13:37 schreef Julian Tenney: > as soon as you can, if there are no objections? > > Thanks a lot Tom > ________________________________________ > From: xerte-dev-bounces at lists.nottingham.ac.uk > [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Tom Reijnders > [reijnders at tor.nl] > Sent: 13 December 2015 12:32 > To: 'For Xerte technical developers' > Subject: [Xerte-dev] Release > > All my fixes and additions are in there now (fixed issue with > installing on HTTPS, and added wysiwyg flag to grid, and used it in > the Sortable Grid). > > The most annoying change (for the end-users) is moving Authentication > to the management.php. It means that after upgrading to 3.1, people > HAVE to run upgrade.php, and than correct the authentication in > management.php > > The advantage is obvious: > - Easier install (you set the authentication during the install) > - Easier future upgrades, the authentication will not be overwritten. > > When do you want me to prepare the release? > > Tom > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev From Fay.Cross at nottingham.ac.uk Wed Dec 16 16:20:19 2015 From: Fay.Cross at nottingham.ac.uk (Fay Cross) Date: Wed, 16 Dec 2015 16:20:19 +0000 Subject: [Xerte-dev] Optional properties menu Message-ID: Hello Does anyone else have problems with users finding the optional properties panel in the new editor? We are asked about this quite often and I don't think it's as easy to notice as in the Flash editor. Does anyone think it's worth changing this slightly? Perhaps having it open initially? I'm not sure this would be a great solution either though. Any thoughts? Fay -------------- next part -------------- An HTML attachment was scrubbed... URL: From reijnders at tor.nl Wed Dec 16 17:53:04 2015 From: reijnders at tor.nl (Tom Reijnders) Date: Wed, 16 Dec 2015 18:53:04 +0100 Subject: [Xerte-dev] Re: Optional properties menu In-Reply-To: References: Message-ID: <5671A500.1070003@tor.nl> Yes, we have had some users that weren't able to locate the optional parameters. My personal preference would be to open the panel by default. Just my 2c. Op 16-12-2015 om 17:20 schreef Fay Cross: > > Hello > > Does anyone else have problems with users finding the optional > properties panel in the new editor? We are asked about this quite > often and I don?t think it?s as easy to notice as in the Flash editor. > > Does anyone think it?s worth changing this slightly? Perhaps having it > open initially? I?m not sure this would be a great solution either > though. Any thoughts? > > Fay > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > > > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 -------------- next part -------------- An HTML attachment was scrubbed... URL: From ronm at mitchellmedia.co.uk Wed Dec 16 18:18:15 2015 From: ronm at mitchellmedia.co.uk (Ron Mitchell) Date: Wed, 16 Dec 2015 18:18:15 +0000 Subject: [Xerte-dev] Re: Optional properties menu In-Reply-To: <5671A500.1070003@tor.nl> References: <5671A500.1070003@tor.nl> Message-ID: <874C0FEB-8E56-4568-B9DC-A4899121DF56@mitchellmedia.co.uk> Perhaps we can open by default based on resolution eg open by default if width 1024 or higher but closed by default if less than 1024? Sent from my iPhone > On 16 Dec 2015, at 17:53, Tom Reijnders wrote: > > Yes, we have had some users that weren't able to locate the optional parameters. My personal preference would be to open the panel by default. Just my 2c. > > Op 16-12-2015 om 17:20 schreef Fay Cross: >> Hello >> >> Does anyone else have problems with users finding the optional properties panel in the new editor? We are asked about this quite often and I don?t think it?s as easy to notice as in the Flash editor. >> >> Does anyone think it?s worth changing this slightly? Perhaps having it open initially? I?m not sure this would be a great solution either though. Any thoughts? >> >> Fay >> This message and any attachment are intended solely for the addressee >> and may contain confidential information. If you have received this >> message in error, please send it back to me, and immediately delete it. >> >> Please do not use, copy or disclose the information contained in this >> message or in any attachment. Any views or opinions expressed by the >> author of this email do not necessarily reflect the views of the >> University of Nottingham. >> >> This message has been checked for viruses but the contents of an >> attachment may still contain software viruses which could damage your >> computer system, you are advised to perform your own checks. Email >> communications with the University of Nottingham may be monitored as >> permitted by UK legislation. >> >> >> _______________________________________________ >> Xerte-dev mailing list >> Xerte-dev at lists.nottingham.ac.uk >> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev > > -- > -- > > Tom Reijnders > TOR Informatica > Chopinlaan 27 > 5242HM Rosmalen > Tel: 073 5226191 > Fax: 073 5226196 > > > This message and any attachment are intended solely for the addressee > and may contain confidential information. If you have received this > message in error, please send it back to me, and immediately delete it. > > Please do not use, copy or disclose the information contained in this > message or in any attachment. Any views or opinions expressed by the > author of this email do not necessarily reflect the views of the > University of Nottingham. > > This message has been checked for viruses but the contents of an > attachment may still contain software viruses which could damage your > computer system, you are advised to perform your own checks. Email > communications with the University of Nottingham may be monitored as > permitted by UK legislation. > _______________________________________________ > Xerte-dev mailing list > Xerte-dev at lists.nottingham.ac.uk > http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: From Fay.Cross at nottingham.ac.uk Thu Dec 17 07:27:20 2015 From: Fay.Cross at nottingham.ac.uk (Fay Cross) Date: Thu, 17 Dec 2015 07:27:20 +0000 Subject: [Xerte-dev] Re: Optional properties menu In-Reply-To: <874C0FEB-8E56-4568-B9DC-A4899121DF56@mitchellmedia.co.uk> References: <5671A500.1070003@tor.nl> <874C0FEB-8E56-4568-B9DC-A4899121DF56@mitchellmedia.co.uk> Message-ID: That sounds like a good idea ? I?ll add it to GitHub as something to look at From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 16 December 2015 18:18 To: For Xerte technical developers Subject: [Xerte-dev] Re: Optional properties menu Perhaps we can open by default based on resolution eg open by default if width 1024 or higher but closed by default if less than 1024? Sent from my iPhone On 16 Dec 2015, at 17:53, Tom Reijnders > wrote: Yes, we have had some users that weren't able to locate the optional parameters. My personal preference would be to open the panel by default. Just my 2c. Op 16-12-2015 om 17:20 schreef Fay Cross: Hello Does anyone else have problems with users finding the optional properties panel in the new editor? We are asked about this quite often and I don?t think it?s as easy to notice as in the Flash editor. Does anyone think it?s worth changing this slightly? Perhaps having it open initially? I?m not sure this would be a great solution either though. Any thoughts? Fay This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -------------- next part -------------- An HTML attachment was scrubbed... URL: From Julian.Tenney at nottingham.ac.uk Thu Dec 17 07:31:44 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Thu, 17 Dec 2015 07:31:44 +0000 Subject: [Xerte-dev] Re: Optional properties menu In-Reply-To: References: <5671A500.1070003@tor.nl> <874C0FEB-8E56-4568-B9DC-A4899121DF56@mitchellmedia.co.uk>, Message-ID: <5C33B277BFD6E9458C6D394195F98CF604729B44@UiWexMBX08.ad.nottingham.ac.uk> that sounds good, yes, it is a problem as users aren't always finding it, and soemtimes in rapid demos we don't talk about optional properties all that much, so users aren't always aware of it ________________________________________ From: xerte-dev-bounces at lists.nottingham.ac.uk [xerte-dev-bounces at lists.nottingham.ac.uk] on behalf of Fay Cross [Fay.Cross at nottingham.ac.uk] Sent: 17 December 2015 07:27 To: For Xerte technical developers Subject: [Xerte-dev] Re: Optional properties menu That sounds like a good idea ? I?ll add it to GitHub as something to look at From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Ron Mitchell Sent: 16 December 2015 18:18 To: For Xerte technical developers Subject: [Xerte-dev] Re: Optional properties menu Perhaps we can open by default based on resolution eg open by default if width 1024 or higher but closed by default if less than 1024? Sent from my iPhone On 16 Dec 2015, at 17:53, Tom Reijnders > wrote: Yes, we have had some users that weren't able to locate the optional parameters. My personal preference would be to open the panel by default. Just my 2c. Op 16-12-2015 om 17:20 schreef Fay Cross: Hello Does anyone else have problems with users finding the optional properties panel in the new editor? We are asked about this quite often and I don?t think it?s as easy to notice as in the Flash editor. Does anyone think it?s worth changing this slightly? Perhaps having it open initially? I?m not sure this would be a great solution either though. Any thoughts? Fay This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev -- -- Tom Reijnders TOR Informatica Chopinlaan 27 5242HM Rosmalen Tel: 073 5226191 Fax: 073 5226196 This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it. Please do not use, copy or disclose the information contained in this message or in any attachment. Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham. This message has been checked for viruses but the contents of an attachment may still contain software viruses which could damage your computer system, you are advised to perform your own checks. Email communications with the University of Nottingham may be monitored as permitted by UK legislation. _______________________________________________ Xerte-dev mailing list Xerte-dev at lists.nottingham.ac.uk http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev From Julian.Tenney at nottingham.ac.uk Thu Dec 17 11:10:44 2015 From: Julian.Tenney at nottingham.ac.uk (Julian Tenney) Date: Thu, 17 Dec 2015 11:10:44 +0000 Subject: [Xerte-dev] Xerte Online Toolkits v3.1 Message-ID: <5C33B277BFD6E9458C6D394195F98CF60472A142@UiWexMBX08.ad.nottingham.ac.uk> Hi, The Xerte Project's community of developers is proud to announce that version 3.1 of Xerte Online Toolkits is now available for download from the community site at http://www.xerte.org.uk. Version 3.1 is an incremental update that addresses a number of small issues that surfaced following the release of v3.0 back in the summer: in particular thanks to Len Johnson for his work on improving the installer, and to John Horne at Plymouth for sending through a number of fixes and patches. As always we'd recommend users upgrade their installations to the latest code. This has been an incredible year for The Xerte Project: we've joined the Apereo Foundation and the Open Source Initiative, and firmly established the software as a viable and sustainable open source project; we've released version 3.0 with significant enhancements to the editor and several new templates, and we've seen our community of users and developers continue to grow. Thank you to everyone who has contributed to the project this year, and to everyone out there I wish you a very merry Christmas, Julian -------------- next part -------------- An HTML attachment was scrubbed... URL: