[Xerte-dev] Re: Debugging Xerte

Pat Lockley patrick.lockley at googlemail.com
Fri May 11 11:46:50 BST 2012


When i did the OSLS thing, I got this all the time (in the end I had
two debuggers, one for online, one for local).

I also think, it might be a security issue?

On Fri, May 11, 2012 at 11:41 AM, Julian Tenney
<Julian.Tenney at nottingham.ac.uk> wrote:
> Exactly, because the swf in the browser can talk to the swf in the editor. No sarcasm, I've honestly never thought about that.
>
> -----Original Message-----
> From: xerte-dev-bounces at lists.nottingham.ac.uk [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Pat Lockley
> Sent: 11 May 2012 11:41
> To: For Xerte technical developers
> Subject: [Xerte-dev] Re: Debugging Xerte
>
> caching the local connection (unless sarcasm)
>
> On Fri, May 11, 2012 at 11:29 AM, Julian Tenney
> <Julian.Tenney at nottingham.ac.uk> wrote:
>> I found out recently that if you have Xerte open with a debug window open,
>> then publish your project, when you run your project in a web browser it
>> will output the debug statements to the debug window.
>>
>>
>>
>> Blimey. That has never occurred to me.
>>
>>
>>
>> From: xerte-dev-bounces at lists.nottingham.ac.uk
>> [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Kemp
>> Johnathan
>> Sent: 11 May 2012 11:29
>> To: For Xerte technical developers
>> Subject: [Xerte-dev] Re: Debugging Xerte
>>
>>
>>
>> I found out recently that if you have Xerte open with a debug window open,
>> then publish your project, when you run your project in a web browser it
>> will output the debug statements to the debug window.
>>
>>
>>
>> I was thinking more of something that would stop and step through operation
>> for situations in which Xerte dies on you. So that you could put in break
>> points.
>>
>>
>>
>> Having slept on my particular programming problem I now have some useful
>> ideas were to start looking for the offending code - time to go looking is
>> another matter :-(
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 11 May 2012 08:55, Julian Tenney <Julian.Tenney at nottingham.ac.uk> wrote:
>>
>> getURL('javascript:alert(' + yourDebugMessage + ');');
>>
>>
>>
>> From: xerte-dev-bounces at lists.nottingham.ac.uk
>> [mailto:xerte-dev-bounces at lists.nottingham.ac.uk] On Behalf Of Kemp
>> Johnathan
>> Sent: 10 May 2012 23:09
>> To: Xerte Developers Discussion List
>> Subject: [Xerte-dev] Debugging Xerte
>>
>>
>>
>> I am updating the scenario connector page to make it easier to use and have
>> hit a situation where adding a particular xml element in the xwd form
>> results in xerte locking up.
>>
>>
>>
>> Is there any way of executing a preview or publishing the project and then
>> viewing it in a browser such that it is possible to use some kind of
>> debugging tool so that I can trace the progress of the code?
>>
>>
>>
>> Of have I got to do it the hard way and start commenting out blocks of code
>> :-(
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it. Please do not
>> use, copy or disclose the information contained in this message or in any
>> attachment. Any views or opinions expressed by the author of this email do
>> not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an attachment
>> may still contain software viruses which could damage your computer system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do not
>> use, copy or disclose the information contained in this message or in any
>> attachment.  Any views or opinions expressed by the author of this email do
>> not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an attachment
>> may still contain software viruses which could damage your computer system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do not
>> use, copy or disclose the information contained in this message or in any
>> attachment.  Any views or opinions expressed by the author of this email do
>> not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an attachment
>> may still contain software viruses which could damage your computer system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>
> _______________________________________________
> Xerte-dev mailing list
> Xerte-dev at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>
> _______________________________________________
> Xerte-dev mailing list
> Xerte-dev at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev



More information about the Xerte-dev mailing list