[Xerte-dev] Re: Back / Next Functionlaity

Kemp Johnathan johnathan.kemp at ntlworld.com
Tue Jul 31 15:14:15 BST 2012


Adding the additional navigation options depends on a couple of issues

   1. When the release is going to take place. I am going to have very
   little time this week to implement the changes and no time at all next week.
   2. I don't want to make changes until I feel they have a general
   consensus behind them. I have already removed the ability to set individual
   navigation buttons, which was part of the original functionality, in order
   to make the pages more XOT friendly. To simply replace the functionality
   now would be to ignore the merit of the discussions that lead to the
   simplification of the options. Which is why I suggested deferring any
   further developments until the pages have had a little exposure and we can
   sit round a table and discuss the various issues the connector pages raise.

Unless things have changed as a result of the language developments, it is
my understanding that changes to the model and xwd files would
automatically pass through to existing XOT projects. So a delay until
October should not prevent anyone developing in the meantime. Any changes
would be fully backward compatible.

Kind regards

Johnathan

On 31 July 2012 15:03, Ron Mitchell <ronm at mitchellmedia.co.uk> wrote:

> Sounds like a good idea!
>
>
>
> But could the "Back, Next and TOC", "Back and Next only", "Back only",
> "Next only" options still be added before the meeting - indeed before
> release? If not so be it but my point and reasons for those option are
> valid for my planned usage regardless of the history setting.
>
>
>
> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
> *Sent:* 31 July 2012 14:46
>
> *To:* For Xerte technical developers
> *Subject:* [Xerte-dev] Re: Back / Next Functionlaity
>
>
>
> >How many times do I have to make this point.
>
> BUTTONS DO NOT CHANGE THEIR FUNCTION.
>
>
>
> >OK, I’m going to put the navigation back to linear in all situations. I’m
> going to leave the rootIcon.setNavigationStyle() method so you can switch
> it if you want,.
>
>
>
> I am not trying to be pedantic.
>
> I am trying to ensure we are all sharing a common understanding and at the
> moment I am confused.
>
>
>
> If I use the setNavigationStyle() method then the back button will change
> its functioning. So is that OK because it is still a back button. Or is
> that unacceptable because buttons don't change their function?.
>
>
>
> Can I make a suggestion?
>
>
>
> It will be relatively easy at a later date to add additional exit
> navigation button setting options to the connector pages xwd and model
> files. I have in an earlier post discussed a workaround that can be used to
> get the best out of the Connector pages with purely linear navigation. So
> how about we leave things as they are for now and then discuss this at the
> forthcoming Xerte meet in October?
>
>
>
> This will avoid any further delays in the Xerte release, allow a little
> time for people to try out the Connector pages and give both the Authoring
> and Developer communities an opportunity to engage with the discussion.
>
>
>
> All in favour ?
>
>
>
> Johnathan
>
>
>
>
>
>
>
>
>
> On 31 July 2012 12:37, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
> wrote:
>
> Personally I think it should be set at the learning object level so that
> navigation remains consistent throughout the project. Wouldn't that lead
> to the confusion and inconsistency Julian is trying to avoid? I would only
> see this being needed if a connector is used within the project and only
> then if required for a specific purpose e.g. to go back to the connector
> rather than linear back. (Also see response to 3 below)
>
>
>
> How many times do I have to make this point.
>
> BUTTONS DO NOT CHANGE THEIR FUNCTION.
>
>
>
>
>
> This message and any attachment are intended solely for the addressee and
> may contain confidential information. If you have received this message in
> error, please send it back to me, and immediately delete it. Please do not
> use, copy or disclose the information contained in this message or in any
> attachment. Any views or opinions expressed by the author of this email do
> not necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an
> attachment may still contain software viruses which could damage your
> computer system: you are advised to perform your own checks. Email
> communications with the University of Nottingham may be monitored as
> permitted by UK legislation.
>
>
> _______________________________________________
> Xerte-dev mailing list
> Xerte-dev at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>
> This message and any attachment are intended solely for the addressee and
> may contain confidential information. If you have received this message in
> error, please send it back to me, and immediately delete it.   Please do
> not use, copy or disclose the information contained in this message or in
> any attachment.  Any views or opinions expressed by the author of this
> email do not necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an attachment
> may still contain software viruses which could damage your computer system:
> you are advised to perform your own checks. Email communications with the
> University of Nottingham may be monitored as permitted by UK legislation.
>
>
>
> _______________________________________________
> Xerte-dev mailing list
> Xerte-dev at lists.nottingham.ac.uk
> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>
> This message and any attachment are intended solely for the addressee and
> may contain confidential information. If you have received this message in
> error, please send it back to me, and immediately delete it.   Please do
> not use, copy or disclose the information contained in this message or in
> any attachment.  Any views or opinions expressed by the author of this
> email do not necessarily reflect the views of the University of Nottingham.
>
> This message has been checked for viruses but the contents of an attachment
> may still contain software viruses which could damage your computer system:
> you are advised to perform your own checks. Email communications with the
> University of Nottingham may be monitored as permitted by UK legislation.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nottingham.ac.uk/pipermail/xerte-dev/attachments/20120731/25fb029f/attachment.html>


More information about the Xerte-dev mailing list