[Xerte-dev] Re: Preparation of XOT and Xerte test installs

Kemp Johnathan johnathan.kemp at ntlworld.com
Thu Apr 5 12:01:04 BST 2012


OK

The file runtime/language-config.xml has changed in that it is defining
file names now in a different format e.g. the old version had
file="english.xml" whilst the new version has file="en-gb.xml".

The solution to the missing language file error is to rename the language
file in xerte svn runtime/languages/ from english.xml to en-gb.xml

I have duplicated the english.xml file and renamed the copy to en-gb.xml.

I am not sure there is anything more I can do to move this forward at the
moment.

Tom if there is anything  you can think of let me know.

Kind regards

Johnathan

On 5 April 2012 11:28, Kemp Johnathan <johnathan.kemp at ntlworld.com> wrote:

> I have just taken a copy of the current files from the xerte svn runtime
> folder and used Julian's setup.iss script (having modified the paths to
> match my setup) and used inno to make a test build. I then installed it on
> a pc that did not have xerte installed.
>
> I was able to create a new project and add connector pages to it.
>
> However the preview failed with the message "error language data failed to
> load".  (It is necessary on my version at present to manually copy across
> the pagetemplates.xwd and xml files to the new project, but when this is
> done the languages error persists)
>
> So I don't know why there should have been a problem with the connector
> pages not showing yesterday.
>
> However something has been changed somewhere with respect to languages.
>
> I don't get this on my development version so I will start swapping files
> out to try to find the file that is causing the problem.
>
> Kind regards
>
> Johnathan
>
> On 5 April 2012 11:06, Julian Tenney <Julian.Tenney at nottingham.ac.uk>wrote:
>
>> If Tom can build it, he can put it somewhere on xerte.org where people
>> can download and install it.
>>
>>
>>
>> Rather than build a zip for xot, work on getting the trunk into  a state
>> that has everything in it for testing: all the models moved to the new
>> format for them, etc. Then we can push on with testing / comments and tease
>> everything out. I sense this is probably closer than I think, it just needs
>> finishing off now!
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 05 April 2012 10:00
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> OK
>>
>>
>>
>> I put everything that I think is needed in the xerte svn runtime folder.
>>
>>
>>
>> What I would like is to take the three files in the runtime/pages/ folder
>>
>>
>>
>> pagetemplate.rlo
>>
>> pagetemplate.xml
>>
>> pagetemplate.xwd
>>
>>
>>
>> and rename them to pages.rlo etc
>>
>>
>>
>> Then the swf that handles the creation of new projects needs to copy all
>> three of those pages.rlo, xml, xwd to the new project folder.
>>
>>
>>
>> At present I can only guess why Julian might have been getting no
>> connector pages showing up. The only way I could duplicate it would be to
>> remove the connector page xwds from the wizards/en folder but that makes no
>> sense.
>>
>>
>>
>> I will contact Fay to see if she can make available to me the build that
>> Julian created so that I can try it out myself and see if I can find any
>> obvious difference between it and my development setup.
>>
>>
>>
>> I have copied the runtime folder to a PC that does not have Xerte
>> installed and then run xerte.exe and I was able to create a project with
>> connector pages, so everything appears to be in the svn that needs to be.
>> The only issue I hit was when I tried to preview the project it failed with
>> an error message saying it could not find the language file. This might be
>> because associations in windows were not set up as the program was not
>> installed. Just a thought though. There have been recent discussions
>> regarding whether to use "en" or "EN" or "en ?" (I can't remember what the
>> second bit was. Would these discussions have resulted in any changes that
>> need to be reflected in the naming of any files or folders e.g. wizards/en ?
>>
>>
>>
>> I am really relieved you can make a build Tom. I have just installed inno
>> and had my sleeves rolled up. But you know what you are doing with inno and
>> I am totally new to it so this has to be a more reliable option.
>>
>>
>>
>> Let me know if there is more I can do and meanwhile I will now email Fay.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 4 April 2012 20:31, Tom Reijnders <reijnders at tor.nl> wrote:
>>
>> Yes I can fix that. Tell me what needs to be done (i.e. where are the
>> file that need copying) and yes, I can change the name of the rlo file as
>> well.
>>
>> I can also build an 2.18 beta installer, and probably be able to host it
>> as well. I have used Inno before, so I should be able to figure that part
>> out.
>>
>> Tom
>>
>> Op 4-4-2012 19:06, Kemp Johnathan schreef:
>>
>> Latest on the attempts to build a xerte 2.18 test installation.
>>
>>
>>
>> We now know that the shrinking of Xerte to the task bar was caused by the
>> failure of the routine that creates a new project to copy the
>> pagetemplate.xml and pagetemplate.xwd files to the new project folder.
>> Probably because up till now there had never been an xml and xwd file
>> associated with .rlo files.
>>
>>
>>
>> Tom would you be able to fix this? At the same time is it worth changing
>> the default project file name to pages.rlo so as to avoid any confusion
>> with pageTemplates.rlt?
>>
>>
>>
>> I think there must be something wrong with the build script. Which is a
>> challenge as I have never used Inno before. The reason I say this is that
>> the problem experienced was that new projects did not display the new
>> Connector pages option in the menu.
>>
>>
>>
>> However I have copied the whole of the xerte svn runtime folder to a PC
>> that does not have xerte installed and then run Xerte,exe. It was possible
>> to create a new project and to add connector pages to that project. There
>> was an issue on previewing that the language.xml file could not be found,
>> but that might be because Xerte was not installed.
>>
>>
>>
>> Fay I don't know if you are following this, but in Julian's absence would
>> you be able to make available the installation build that he put together?
>> I would like to install it and then try to compare it with my installation
>> to see what might be missing.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 4 April 2012 17:01, Kemp Johnathan <johnathan.kemp at ntlworld.com>
>> wrote:
>>
>>
>>
>> The reason Xerte was shrinking to the task bar was because the associated
>> pagetemplate.xml and pagetemplate.xwd files were not being copied into the
>> project folder, when a new project is created. This probably has always
>> been the case and needs fixing in a swf somewhere. I realise now that the
>> .rlo work is the most recent stuff and I must have copied the xwd and xml
>> file from one project to another as I developed it.
>>
>>
>>
>> I have yet to pin down the reason for the no show of the connector menus.
>>
>>
>>
>> JK
>>
>>
>>
>> On 4 April 2012 16:45, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> If you can make a build, I reckon Tom can put it somewhere for people to
>> access it, or Fay can.
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 16:44
>>
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> If I can get this working is there anyone who can make the release
>> available while you are away?
>>
>>
>>
>> I am sorry this has become so difficult, it's typical when you just need
>> to get things tidied up before a break!
>>
>>
>>
>> I hope you are getting away for a few days and are able to have a great
>> time.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>>
>>
>> On 4 April 2012 16:36, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> Install inno setup and run setup.iss in the /inno folder. You might need
>> to change some paths.
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 16:36
>>
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> What is puzzling me is that when I run xerte.exe from my copy of svn
>> runtime I do get Connector pages in the menu.
>>
>>
>>
>> To create a build I run run.bat?
>>
>>
>>
>> Can I run that on my copy of svn and do a build on my local pc?
>>
>>
>>
>> JK
>>
>>
>>
>>
>>
>>
>>
>> On 4 April 2012 16:29, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> It doesn’t. I have an up to date set of files in my xerte repo, so I have
>> no idea why this doesn’t work. Either you haven’t commited something or
>> you’re using a different set of files.
>>
>>
>>
>> Please test everything and when you think you’ve got a working build, you
>> can build the setup.exe using inno setup. I have committed an updated
>> script. Tom can probably host it somewhere so people can try it, but
>> there’s no point in not doing the testing yourself first, otherwise
>> everyone just wastes a lot of time. I am out of the office from tomorrow
>> until 19th April, and realistically it’s more like beginning of May when
>> I will have any time again. You guys are going to have to work some of this
>> stuff out for yourselves if we’re ever going to get these releases done.
>>
>>
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 16:26
>>
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> It should be looking like in the attached file.
>>
>>
>>
>> JK
>>
>>
>>
>>
>>
>>
>>
>> On 4 April 2012 16:19, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> Should I see connector pages in these menus?
>>
>>
>>
>> *Error! Filename not specified.*
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 16:05
>>
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> I ran xerte.exe from my copy of the svn runtime and was able to create a
>> new project that had access to connector pages.
>>
>>
>>
>> Let me know when you have a build and I'll give it a test.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 4 April 2012 16:00, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> If you run Xerte.exe in the checked out files, you will get the running
>> version of the app once built. If that doesn’t work, it needs fixing, so
>> you can answer your own question about what will happen in the build: just
>> run xerte.exe amongst the repo files.
>>
>>
>>
>> If it doesn’t work, then someone needs to check in the files that makes
>> it work, cos I’ve got the latest files from the svn.
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 15:50
>>
>>
>> *To:* For Xerte technical developers
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> I have just performed a test in which I copied and retitled an xwd and
>> its associated rlm file and then changed the menus value from "Text" to
>> "TextX"
>>
>> When I then opened Xerte and created a new pages  project the new TextX
>> menu group was displayed with the new page in it.
>>
>>
>>
>> So if you are still having issues with the Connector pages not being
>> displayed in a pages project (note I have not yet updated pageTemplates.xtp
>> so that will not currently offer Connector pages) then I think it is
>> probably down to not having the right version of the files that deliver the
>> Xerte editor, exe. etc.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 4 April 2012 15:32, Kemp Johnathan <johnathan.kemp at ntlworld.com>
>> wrote:
>>
>> Try now,
>>
>>
>>
>> I thought I had edited that data out, not sure how it escaped!
>>
>>
>>
>> I have updated the .rlo file and tested the set in a new Xerte project.
>> There should be one blank page in the project.
>>
>>
>>
>> If the connector pages still do not show I am not sure why that might be
>> as to my knowledge what is offered is based on what is in the Wizard
>> folder, and correct references in the xwd menus property.
>>
>>
>>
>> It might indicate that something that governs the functioning of
>> Xerte.exe has not been updated.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 4 April 2012 15:19, Kemp Johnathan <johnathan.kemp at ntlworld.com>
>> wrote:
>>
>> Whoops!
>>
>>
>>
>> Back in a couple of minutes - that's what happens when you try to include
>> the latest bits from a test project :-(
>>
>>
>>
>> JK
>>
>>
>>
>> On 4 April 2012 15:02, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> I made a build and installed it, created a new pages project: it doesn’t
>> start empty. There are no connector pages amongst the menus?
>>
>>
>>
>> *Error! Filename not specified.*
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 14:45
>>
>>
>> *To:* For Xerte technical developers
>>
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> OK latest update.
>>
>>
>>
>> Re. XOT The files (models, thumbs, data.xwd, Nottingham.rlt that are in
>> the svn have been briefly tested in XAMPP and it is possible to create a
>> project and add new pages. One feature that will need attention is that
>> some of the pages are missing icons, but I think these have to be added in
>> Flash. So if Ron were to take the contents of the
>> modules/xerte/parent_templates/Nottingham folder that are in the XOT svn he
>> should be able to use these with XAMPP to build a test installation for
>> testing the new models, but it will not include currently the language
>> features.
>>
>>
>>
>> Re. Xerte
>>
>>
>>
>> I have added files to the xerte svn runtime which I think will be enough
>> to create a working install. With one big proviso - I don't know which
>> files Tom worked on to provide the support in the Xerte application for the
>> new "pages" project type. If these changes have been added to the runtime
>> then we should be in business, if not then they will need adding.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>>
>>
>>
>>
>> On 4 April 2012 12:52, Julian Tenney <Julian.Tenney at nottingham.ac.uk>
>> wrote:
>>
>> Have you done any provisional testing with XAMPP? It’s easy to install
>> toolkits on a local machine, and you can check you can at least create,
>> edit, save an LO before anyone else tries to set it up,
>>
>>
>>
>> *From:* xerte-dev-bounces at lists.nottingham.ac.uk [mailto:
>> xerte-dev-bounces at lists.nottingham.ac.uk] *On Behalf Of *Kemp Johnathan
>> *Sent:* 04 April 2012 12:09
>>
>>
>> *To:* Xerte Developers Discussion List
>>
>> *Subject:* [Xerte-dev] Re: Preparation of XOT and Xerte test installs
>>
>>
>>
>> I have now successfully committed to the XOT svn trunk the new model
>> files, missing thumbnails, individual xwd files (in a new folder
>> wizards/en/ ) and replaced data.xwd with an equivalent built using Tom's
>> php scripts from the individual xwds.
>>
>>
>>
>> This should provide a working set of models to test.
>>
>>
>>
>> During developments several changes were made to XMLengine.swf,
>> wizard.swf and editor.swf. I don't know if the people responsible for these
>> changes have updated them in the XOT svn.
>>
>>
>>
>> Tom if you have made changes to any of the models then these will need
>> updating in the svn. If there have been changes to the xwds then a new
>> data.xwd file will need to be generated.
>>
>>
>>
>> I don't know what else will need adding to the XOT svn in order to
>> complete the support for modularisation - Tom I think this is an area in
>> which you will know best.
>>
>>
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>> On 3 April 2012 12:03, Kemp Johnathan <johnathan.kemp at ntlworld.com>
>> wrote:
>>
>> Ron is ready to set up a test server, I have some model and xwd files and
>> thumbnails that are ready for use but there a re a few things I am not sure
>> about. I am posting this to the developer list so that the communication is
>> shared with all parties who are helping to put this new development on the
>> road.
>>
>>
>>
>> 1.      With respect to the new model and xwd files, Tom have you made
>> any changes to copies of the files in the xerte svn pageWizards/models and
>> pageWizards/en folders? I know you mentioned earlier changing the way that
>> "question n of m" was handled in some of the pages. I have not noticed any
>> changes to the xwd and rlm files in the pageWizards section of the svn. If
>> there are changes where can I get the new version of the files as they need
>> adding to the xerte build files and the XOT build files.
>>
>> 2.      With respect to a new xerte build am I right in assuming that we
>> need to add a new "pages" folder to the xerte svn "runtime" folder. This
>> "pages" folder will contain all the default files for a new "pages"
>> project. Also that the runtime folder will need new folders for "php" to
>> contain the php language, and "scripts" to contain the php script files
>> that build the template.xwd file.
>>
>> 3.      With respect to the XOT build, It is my understanding that new
>> files are being added directly to the trunk and that I need to add the
>> model files (once the issue in 1. is sorted) to the folder
>> modules/xerte/parent_templates/Nottingham/models/
>>
>> 4.      In addition to point 3. I need to create a new folder in
>> modules/xerte/parent_templates/Nottingham/wizards/en which will contain the
>> individual xwd files.
>>
>> 5.      I will also add the new thumbnail images to the
>>  modules/xerte/parent_templates/Nottingham/thumbs folder.
>>
>> 6.      Tom what if any php scripts will need adding to the XOT server
>> and where will they be located?
>>
>> 7.      My knowledge of XOT is limited. Is there anything else we need
>> to consider in order to be in a position where we can say to Ron that he
>> can download the XOT trunk and use that to build his test server?
>>
>> 8.      Once we have the XOT test server up and running can we review
>> the situation with the Xerte runtime so that we can get a Xerte build ready
>> for testing?
>>
>> Kind regards
>>
>>
>>
>> Johnathan
>>
>>
>>
>>
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it. Please do not
>> use, copy or disclose the information contained in this message or in any
>> attachment. Any views or opinions expressed by the author of this email do
>> not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment may still contain software viruses which could damage your
>> computer system: you are advised to perform your own checks. Email
>> communications with the University of Nottingham may be monitored as
>> permitted by UK legislation.
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> Xerte-dev mailing list
>>
>> Xerte-dev at lists.nottingham.ac.uk
>>
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>>
>>
>> This message and any attachment are intended solely for the addressee and may contain confidential information. If you have received this message in error, please send it back to me, and immediately delete it.   Please do not use, copy or disclose the information contained in this message or in any attachment.  Any views or opinions expressed by the author of this email do not necessarily reflect the views of the University of Nottingham.
>>
>>
>>
>> This message has been checked for viruses but the contents of an attachment
>>
>> may still contain software viruses which could damage your computer system:
>>
>> you are advised to perform your own checks. Email communications with the
>>
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>>
>>
>> --
>>
>> --
>>
>>
>>
>> Tom Reijnders
>>
>> TOR Informatica
>>
>> Chopinlaan 27
>>
>> 5242HM Rosmalen
>>
>> Tel: 073 5226191
>>
>> Fax: 073 5226196
>>
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>> _______________________________________________
>> Xerte-dev mailing list
>> Xerte-dev at lists.nottingham.ac.uk
>> http://lists.nottingham.ac.uk/mailman/listinfo/xerte-dev
>>
>> This message and any attachment are intended solely for the addressee and
>> may contain confidential information. If you have received this message in
>> error, please send it back to me, and immediately delete it.   Please do
>> not use, copy or disclose the information contained in this message or in
>> any attachment.  Any views or opinions expressed by the author of this
>> email do not necessarily reflect the views of the University of Nottingham.
>>
>> This message has been checked for viruses but the contents of an
>> attachment
>> may still contain software viruses which could damage your computer
>> system:
>> you are advised to perform your own checks. Email communications with the
>> University of Nottingham may be monitored as permitted by UK legislation.
>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.nottingham.ac.uk/pipermail/xerte-dev/attachments/20120405/bcefcfba/attachment-0001.html>


More information about the Xerte-dev mailing list